AudioControl Ten Series III Uživatelský manuál stáhnout pdf (Strana 13)

ASTRO (Optional Feature)

Voice Testing: ASTRO -compatible vocoder for

both generator and receiver provides

functional voice testing capability via

internal speaker and microphone

accessory. Scope display of voice

waveform can also be selected.

EMBEDDED Link Control Field (LCF)

SIGNALING Presentation Address (PA)

Encode Capability: Key ID

Network ID

Busy Bits

Encode

Operator Entry: A default configuration can be selected

or a detailed special screen can be

accessed for customized programming.

Decoding Operation: A dedicated screen may be selected to

display and decode the same data as

described in the encode section. The

unit can also buffer 30 frames of data

on a first-in/first-out basis with the

capability to selectively recall any of

the stored frames to the screen.

BER Capability: Free running, unframed V.52 pseudo

random non-encrypted sequence

compatible with ASTRO test mode.

Measurement range from

0 to 20% bit errors.

Encryption Capability: DVP-XL, DES-XL, DVI-XL. For each

of these algorithms, the unit can accept

customer keys from Motorola external key

loaders (DX Compatible).

ASTRO single key software encryption is

also supported. A single side connector

is provided for key loading.

Generate Capability: ASTRO Voice Frames containing both

VSELP vocoded voice and embedded

signaling or an unframed V.52 pseudo

random non-encrypted sequence.

Monitor Capability: ASTRO Voice Frames containing both

VSELP vocoded voice and embedded

signaling or an unframed V.52 pseudo

random non-encrypted sequence.

Duplex Capability: An unframed V.52 pseudo random

non-encrypted sequence.

Project 25 Conventional (Optional Feature)

Voice Testing: Project 25-compatible IMBE vocoder

for both generator and receiver

provides functional voice testing

capability via internal speaker and

microphone accessory. Scope display

of voice waveform can also be selected.

EMBEDDED

SIGNALING

Encode Capability: Link Control Field (LCF)

Low Speed Data (LSD)

Key ID

Network ID

Status Symbol

Encode Operator Entry: A default configuration can be selected

or a detailed special screen can be

accessed for customized programming.

Decoding Operation: A dedicated screen may be selected to

display and decode the same data as

described in the encode section. The

unit can also buffer 30 frames of data

on a first-in/first-out basis with the

capability to selectively recall any of

the stored frames to the screen.

BER Capability: Compute BER from received non-

encrypted 1011 Hz tone test pattern.

Generate non-encrypted 1011 Hz tone

test pattern or a calibration test pattern

(generates 4.977% BER)for UUT BER

calculation with Project 25 test mode.

Encryption Capability: AES,

DES-OFB, DVP-XL, DES-XL, DVI-XL.

For each of these algorithms, the unit

can accept customer keys from Motorola

external key loaders (DX compatible).

A single side connector is provided for

key loading.

Generate Capability: Project 25 Standard Voice Frames

containing both IMBE vocoded voice

and embedded signaling, a standard

1011 Hz tone test pattern, a calibration

test pattern and a standard silence

test pattern.

Monitor Capability: Either Project 25 Standard Voice

Frames containing IMBE vocoded

voice and embedded signaling or

a standard 1011 Hz tone test pattern.

Project 25 Trunking (Optional Feature)

Call Sequence Tests: Registration/Call Alert

Dispatch Voice

Project 25 Trunking

Test Parameter Entries: WACN ID, System ID, WUID (or UID),

WGID (or GID), RFSS ID, Site ID, IDEN_UP

Test measurement display: Call sequence status indicator

WACN ID, System ID, UID, GID,

WUID, WGID

Frequency Bands: 800MHz – 851.00625MHz – 876.59375MHz)

with a -45Mhz offset. Channel plan #1.

700MHz – 762.00625MHz – 787.59375MHz)

with a +30MHz offset. Channel plan #2.

UHF/VHF – User-defined channel plan.

The channel plan range is 1 thru 16. This

can also be used to define non-standard

700MHz channel plans.

Generate

Deviation Selection: 0.00kHz – 5.00kHz

Base Station Tests: Full duplex modulation of 1011 Hz test

pattern with simultaneous C4FM/LSM

demodulation of voice. Also includes an

averaging wattmeter with selectable

period (.09 sec to 4.32 sec) and an

accuracy of ±15%. Input range is from

.5 watts to 125 watts peak.

BER Capability: Free running, unframed V.52 pseudo

random non-encrypted sequence.

Measurement range from 0 to 20%

bit errors.

Trunking (Cont.)

Trunking Test

Parameter Entries: (Dependent on Test Selection)

Signaling Type

Call Sequence

System ID

Size Code

Connect Tone

Frequency Band

Control and Traffic Channel (by

frequency and channel number)

Test Measurement

Display: Call Sequence Status Indicator

Radio ID (Hex or Decimal)

Call Type

RF Performance Data (via exit to

standard screens)

Radio ID Decoding: Type I: Fleet, Sub-fleet & Unit ID

Type II: Talk Group, Unit ID

Smart Zone

Test Support: Auto affiliation test

Frequency Bands: 851-870 MHz, 866-870 MHz Split

Channel

935-941 MHz, 850-860 MHz JSMR

403-522 MHz UHF, 132-175 MHz VHF

Generate Deviation

Selection: 1.2 kHz, 2.4 kHz, 3.125 kHz

Type I System

Configuration Storage: Non-volatile storage of up to 10 fleet

maps with alpha numeric entries

Channel Plan

Entry for VHF/UHF: Separate transmitter and receiver

start-and-end frequency for three blocks.

Independent channel spacing for

each block.

DIAGNOSTIC OPTIONS

1 2 ... 8 9 10 11 12 13 14 15 16

Komentáře k této Příručce

Žádné komentáře

AudioControl Ten Series III Uživatelský manuál Strana 13

Komentáře k této Příručce